WENDIGO_PRINT_IN_PLACE
TOYS
0.00 €
7851 Visualizations
7 Favorites
18 Downloads
Flexible
Print in place
MARIO3D
Tags
Description
Articulated Wendigo for 3D Printing – Halloween Edition
Get ready for Halloween with this articulated Wendigo model! This design can be printed on any 3D printer, although I personally used an Ender 3 V3. The result is an impressive, articulated figure that balances perfectly, making it ideal for the season.
Model Features:
Articulated model printed in one single piece.
Once printed, simply rotate the feet 90 degrees, and the Wendigo will stand on its own, achieving perfect balance.
Printing Tips:
Orientation: It’s recommended to print the model diagonally on the print bed to optimize the stability of the design during the printing process.
Bed Adhesion:
I used a brim to ensure proper adhesion, but if you want extra security, you can opt for a skirt for better stability.
The lower part of the Wendigo is designed with a wider base to further enhance adhesion and reduce the risk of detachment during printing.
Printing Parameters:
Material used: Approximately 80 grams of filament.
Printing speed: I recommend printing at a speed of 80 to 100 mm/s to achieve great results without losing detail.
Additional Tips:
If you're using a different printer or tend to experience bed adhesion issues, make sure to level the bed properly and adjust the bed temperature according to the filament you’re using.
This Wendigo is perfect for those looking for a technical challenge and anyone wanting to add a unique, spooky touch to their Halloween decorations. I hope you enjoy printing it as much as I did designing it!
PrintSettings
altura de capa.2mm,aderencia a la placa: borde,velocidad de impresion:80mm/S,paredes3
Report