ARMORED RHINO
TOYS
3.79 €
760 Visualizations
0 Favorites
0 Downloads
Flexible
Print in place
MCGYBEER
Tags
Description
3D model description
2 Designs included!!
Print in place with no support and no assembly required.
Different versions included, with or without armor, and also available for MMU.
After printing, just move the articulations to get them free. The legs are able to lock in the upright position for easy posing. Extend them to move, compress them to lock. Check the videos below in case of doubt!
Timelapse + postprinting video
Rhino variations video
Check here for Commercial License
Print Settings
A good first layer is mandatory for the print to succeed. Be sure your printer is calibrated and you have good bed adhesion.
I recommend a slow and thick first layer (8 mm/s and 0.3 mm).
Good layer cooling is also recommended, as it prevents curling and warping on overhangs.
For more tips, take a look at my printing tips.
PrintSettings
Print in place with no support and no assembly required.
Report
