ALIEN_SKELETON

TOYS

0.00 €


visibility

28737 Visualizations

favorite

11 Favorites

download

47 Downloads


Identifier number:
33
License:
Paw3D Personal Use
Publish date:
10/4/2024 9:10 PM
Last update date:
10/4/2024 9:10 PM
File type:
.stl

Flexible

Print in place

mario3d - Profile Image

MARIO3D

Tags


Description


Hello, everyone!

I’m excited to share my latest design: the Alien Skeleton. This stunning, fully articulated figure can be used as a toy or for display. The model prints in a single piece, making it convenient and easy to assemble. Just make sure your printer is well-calibrated and use a brim adhesion for the best results.

Don’t miss out on my other designs—take a look and bring some unique creations to your collection!

The best part? It prints in a single piece with no supports needed. To ensure the best results, I recommend the following settings:

Layer height: 0.2mm for a good balance of detail and speed.

Infill density: 20%, which provides the right amount of strength without wasting filament.

Wall count: 3, ensuring durability and a solid feel.

Adhesion type: Brim, to keep the print stable and secure on the build plate.

Make sure your printer is well-calibrated, and you’ll be amazed by the quality of the print. Don’t forget to check out my other designs and add some unique creations to your collection!

PrintSettings


altura de capa.2mm,aderencia a la placa: borde,velocidad de impresion:80mm/S,paredes3

Report