HAPPY BEETLES
TOYS
3.79 €
2141 Visualizations
2 Favorites
0 Downloads
Identifier number:
283
License:
Paw3D Personal Use
Publish date:
12/10/2024 12:49 AM
Last update date:
12/10/2024 12:49 AM
File type:
.stl
Flexible
Print in place
MCGYBEER
Tags
Description
3 Happy Beetles!! Articulated and ready to fly.
Includes:
- Rhino Beetle (Hakuna Matata)
- Stag Beetle (with gear-articulated tweezers)
- Hercules Beetle (with pre-made support for the horn)
No additional supports required. Just slice and print!!
After printing (Rhino / Stag / Hercules):
Carefully remove the tabs on the wings and press from the back to open them. The Hercules Beetle includes pre-made support for the horn. Just remove it with care.
Check here for Commercial License
PrintSettings
A good first layer is mandatory for the print to succeed. Be sure your printer is calibrated and you have good bed adhesion. I recommend a slow and thick first layer (8 mm/s and 0.3 mm).
Good layer cooling is also recommended, as it prevents curling and warping on overhangs.
https://youtu.be/s3WKSUg5oOs
Report
